Buy Dichen Fuser DC500 4K — HDMI 2.1 + DP 1.4 fuser
Dichen
- Chip / controller
- Genuine imported Xilinx FPGA
- Video inputs
- HDMI 2.1, DisplayPort 1.4
- Maximum resolution
- 3840×2160 — 158 Hz (HDMI) / 160 Hz (DP)
Dichen
The Dichen Fuser DC500 has a dual HDMI 2.1 + DP 1.4 interface. The DICHEN DC500 4K fuser is a high-performance device for overlaying onto your main monitor, combining HDMI 2.1 and DP 1.4 interfaces.
Equipped with original imported XILINX FPGA chips that provide outstanding image-processing capability.
Supported resolutions and refresh rates over HDMI 2.1:
1920×1080P at 540 Hz
2560×1440P at 355 Hz
3840×2160P at 158 Hz
GPU recommendations:
Nvidia GTX 3060 or AMD RX 6500XT
The monitor must support full HDMI 2.1 FRL bandwidth (48 Gbit/s). The second PC's CPU must have at least 6 cores.
DP 1.4 version specs
Supported resolutions and refresh rates:
1920×1080P at 480 Hz
2560×1440P at 320 Hz
3840×2160P at 160 Hz
Both the main and secondary PC must have an NVIDIA 10-series, AMD RX500 or newer GPU. The second PC's CPU must have at least 6 cores.
Based on 1 review
Оперативно доставили, продукт соответствует заявленным требованиям!
Bought from us? Tell others how it went.
From the same section of the catalog
The DC500 pairs HDMI 2.1 with DP 1.4 and runs on genuine Xilinx FPGA silicon. Over HDMI 2.1 that means 1920×1080 at 540 Hz, 2560×1440 at 355 Hz and 3840×2160 at 158 Hz — a model for people whose monitor is genuinely fast rather than fast on paper.
If you want video capture and EDID work, look at the DC505, which is the next version. If your monitor is an ordinary 1080p/144 Hz panel there is nothing to pay for here — the Dichen v6 is enough. The rest of the chain: a card, an input module, a second PC; payment and delivery.